Bút Thử Điện SANWA KD3
Specifications
| Detectable voltage range | 80 to 600V AC, 50/60Hz HIGH: Works with IV2 mm jacketed electrical wire or equivalent LOW: Works with bare live part |
| Detection indicator | Red and green LEDs blinks; beep sound |
| Volume | 50 dB or more at 50cm distance from beep emitter |
| Light intensity | Visible at 50cm distance from light emitting section with light intensity of 8,000 lux |
| Dielectric strength | 1 min. at 2000V AC, from sensor to grip |
| Low battery warning | Beep sounds for 2 sec. when voltage falls below approx. 2.4 V and then power is turned OFF |
| Operating temperature/humidity range | Temperature: –10 °C to 45 °C; humidity: 80 % RH or less (no condensation) |
| Battery | LR44(1.5V)x2 |
| Battery life | Approx. 9 hours of continuous operation (approx. 7 mA during detection, approx. 1.5 mA during standby) or 3 years in Auto Power Off or OFF mode |
| Auto Power Off mode | Approx. 5 min. since last detection, 2μA TYP |
| Size/Mass SANWA KD3 | H134xW20XD18mm/Approx. 20g |





Zalo 











